Brooklyn Bedding Spartan vs Sedona Elite Guide
The Brooklyn Bedding Spartan and the Sedona Elite sit at opposite ends of the same brand's lineup, so the choice is simpler than it looks: the Spartan is a 12-inch firm hybrid built around durability and consistent support, and the Sedona Elite is a roughly 15-inch plush, dual-coil luxury hybrid built around cooling and pressure relief. If you sleep on your back or stomach and want a surface that stays flat and firm for years, look at the Spartan. If you sleep on your side, switch positions all night, or run hot, look at the Sedona Elite.
Below is what actually separates them, based on how each mattress is built.
Brooklyn Bedding Spartan: firm, durable, temperature neutral
The Spartan is a 12-inch hybrid that pairs high-density foam with a supportive coil system. Brooklyn Bedding describes it as military-inspired, and the design priorities line up with that: it is built to resist softening and body impressions over time rather than to feel cushioned on night one.
How it feels
Firm. There is no deep plush top layer to sink into. You rest more on the mattress than in it, which keeps your hips from dropping below your shoulders — the thing back and stomach sleepers usually want from a mattress.
Temperature
Brooklyn Bedding calls the Spartan temperature neutral, meaning its breathable construction is designed to avoid trapping heat. That is different from an actively cooling mattress. If you sleep hot enough that it wakes you, the Spartan's firm surface helps (less sinkage means more airflow around your body), but cooling is not its headline feature.
Who it suits
- Back and stomach sleepers who need consistent support
- Anyone replacing a mattress that sagged in the middle
- Households that want long service life over a cushioned feel
- Sleepers who already know they prefer firm
Sedona Elite: plush, dual-coil, built for cooling
The Sedona Elite is a six-layer build roughly 15 inches tall, and its defining feature is two separate coil systems stacked on top of each other. From the top down:
- GlacioTex+ cooling cover
- 1.5" copper-infused memory foam
- 2.5" micro-wrapped coils — up to 6,000 of them
- 1.5" transition foam
- 8" AscensionAr individually encased coils — up to 1,032
- 1" high-density foam base
Why two coil layers matter
Thousands of tiny coils near the surface respond to pressure in smaller zones than a single large coil unit can. In practice that means more contouring at the shoulder and hip, and better airflow through the comfort layers than you get from a solid block of foam. The 8-inch encased coil core underneath still does the structural work.
How it feels
Brooklyn Bedding describes it as a universal medium with ultra-plush top layers. It is a cushioned, contouring feel — the opposite of the Spartan.
Who it suits
- Side sleepers who need give at the shoulder and hip
- Combination sleepers who change position through the night
- Hot sleepers, between the GlacioTex+ cover, copper-infused foam, and coil airflow
- Couples, thanks to the micro-coil and encased-coil layers limiting motion transfer
Spartan vs Sedona Elite: the differences that matter
Firmness
This is the main fork in the road. The Spartan is firm; the Sedona Elite is plush with a medium overall feel. Firmness preference tends to track sleep position more than anything else, so decide this first and the rest follows.
Cooling
Both are breathable, but they get there differently. The Spartan is passively temperature neutral. The Sedona Elite layers in dedicated cooling materials — the GlacioTex+ cover and copper-infused memory foam — plus airflow through two coil layers. If overheating is your specific complaint, the Sedona Elite is the more targeted answer.
Height and bedding fit
Twelve inches versus roughly fifteen is a real difference when you buy sheets. The Spartan works with standard fitted sheets. The Sedona Elite, especially once you add a mattress protector, is the kind of profile that calls for deep-pocket sheets. It also sits noticeably higher off the floor on the same foundation, which matters if getting in and out of bed easily is a consideration.
Motion isolation
Both are listed with motion isolation. The Sedona Elite's up-to-6,000 micro-wrapped coils plus individually encased core coils give it more ways to absorb movement before it crosses the bed, which is worth weighing if one of you gets up earlier than the other.
Sizes
Identical: Twin, Twin XL, Full, Queen, King, and California King. Size is not a tiebreaker here.
Which one should you pick?
A short decision path:
- Side sleeper, or you wake with a sore shoulder: Sedona Elite. The plush top layers and micro-coils give at the pressure points.
- Back or stomach sleeper: Spartan. The firm surface keeps your spine from folding at the hips.
- You overheat at night: Sedona Elite.
- Your last mattress developed a dip: Spartan. Durability is the whole design brief.
- You switch positions constantly: Sedona Elite, which is explicitly built for combination sleepers.
- You and your partner wake each other up: Either works, with the edge to the Sedona Elite.
If you are still torn, firmness is the harder thing to live with when you get it wrong. A hot sleeper on a firm mattress can add a cooling protector or cooler sheets. A side sleeper on a mattress that is too firm has fewer fixes.
What both mattresses share
Both are American-made Brooklyn Bedding hybrids, both ship compressed as a bed-in-a-box, both are listed with a limited lifetime warranty and a 120-night trial, and both typically ship in 3 to 7 business days. Both also work on an adjustable base if that is part of your setup. You can see the rest of the lineup on our Brooklyn Bedding collection page, or compare against other builds in hybrid mattresses.
Frequently asked questions
Is the Brooklyn Bedding Spartan too firm for a side sleeper?
It can be. Firm mattresses do not let the shoulder and hip sink, which is what side sleepers generally need to keep the spine straight. Some side sleepers who prefer a firm feel do fine on it, and a plush topper can soften the surface, but if you sleep mostly on your side the Sedona Elite is the more natural fit.
How tall is each mattress?
The Spartan is 12 inches. The Sedona Elite is approximately 15 inches across six layers. Measure your bed frame and headboard before you decide — a 15-inch mattress on a tall foundation can leave less headboard showing than you expect.
Do I need deep-pocket sheets?
For the Sedona Elite, almost certainly — a 15-inch mattress plus a protector exceeds what many standard fitted sheets cover. For the 12-inch Spartan, standard sheets usually fit.
Can I try either one before buying?
Yes. Both are in our Glendale showroom, and 10 minutes lying on each in your usual sleep position tells you more than any spec sheet. Brooklyn Bedding also includes a 120-night trial, so you have time to judge the feel at home across a full sleep cycle.
Which holds up better over time?
Durability is the Spartan's stated design priority, with high-density foam and a coil system built to maintain support. The Sedona Elite carries the same limited lifetime warranty and uses a dual-coil structure rather than thick foam in the comfort layers, which is generally a point in its favor for long-term resilience. Rotating either mattress regularly helps both.
Try them both in Glendale
Firmness is the one thing you really cannot judge from a product page, and the Spartan and Sedona Elite sit far enough apart that five minutes on each usually settles it. Both are on the floor at our Glendale showroom, where we can also set you up on an adjustable base to see how each one flexes. Every mattress comes with Brooklyn Bedding's 120-night sleep trial, plus free delivery and setup across the Los Angeles area — Glendale, Burbank, Pasadena, and beyond. Stop by, or reach out and we will help you narrow it down.